Hey guys in this video i will be showing how you can use your old router as wifi extender.
Does both router have to be the same channel?
Very helpful! But is there a way to do that process without wires
Are you using the same yellow output ports to connect both routers? in that case are you using the direct or cross cable? this leaves the second DSL port totally free right?
You put the AP router on ‘Channel 7’. Did you do that because you assigned it IP address <192.168.1.7>? Stuff on my WiFi network are already ‘subnet mask’ < =>10. Like my Wireless printer.
Thank You very much for this video, you helped me a lot
So, the LAN cable seems to come out of the LAN4 port on the primary router, but what port does it go into on the secondary?
What app were you using to see the signal strengths?
What if you have multiple ports in your home? can you just get your provider to active a port upstairs and connect a router there while the main router is downstairs?
Can we use this without lan wire
Its so helpful thank you
thank you bro !! big help ..
Hopefully there would be no problem if you use another name differently than the other wireless.
Ахаха, в Индии появились роутеры)))
Bro .. need help.. i have followed all these steps. Wifi is working perfectly . But internet connection is not available in secondary router.. reply quickly
Any problem will come in primary router
This will work if you connect the LAN cable to both the router.
I want to expand my wifi range on D-Link DSL-2740U with another TP-link n series modem . your solution does not work for me . because i must do some setting to connect this two modem together. you just did some setting on the second modem ! . can you help me about this ?
on some router try dissable dhcp for me works you are big dude free net
thank you bro… your video help me …
Hy tell me that both the router have the same ip then if i change it secondary router primary router also change its ip address ?? How to fix it
Finally a normal straight to the point video, thanks!
Good and clear guide.
Not working, I am able to see 2 different networks with the same name, only one gives me connection whole the other just shows good shall strength and stops at obtaining IP address.
Do I need to ensure the channels are the same?
Thanks for the solution! can I do the same and add 3rd router as an extender? Will I have to join the LAN cable to the main router?
Sir, I have Beetel 450TC3 how to use this as secondary WiFi router entender???
HOW DOES IT WORKS IF THE ROUTER IN OTHER HOUSE AND YOU WANT USE YOUR ROUTER AS WIFI EXTENDER WITHOUT THE CABLE
Thanks for this. Well explained, although I soon as I change my extra router’s IP, I can no longer access it Tried many times.
So do you have to put the Same information in the old route as the main one??
Sorry friend!! I did not understand the last step. Did you connect routers togther by LAN cable or what?
What if I have different IP address from the main router?
1:35 do not see the conect cable…YOu have to show how conect the cables…
192.168.1.1 wala page nhi khul rha hai kya kro
So the two router must be connected by a network cable? Can you do this wireless ly ?
Thanks if it works
Can i use remaining ports of 2nd router to use internet in PC?
Very handly.Easy to get & A such of an lmportants thing to be kept in our home.
10 star for you good
Awesome work. Simple steps, It helps me for setup second modem as a wifi extender and now wifi works brilliant and even though I’m at my neighbor’s place. Keep it up mate
Human Verification: In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.
Send this to a friend