Check prices / Purchase here:
UK – https://goo.gl/ZLFSe3
US – https://goo.gl/CqxXgd
======================================
https://www.amazon.com/shop/geekstreet
======================================
WiFi Range Extender, MECO WiFi Booster 300Mbps WiFi Repeater Support Repeater/Access Point/Router Mode with Ethernet Port White
Product description
Specification:
WiFi Band: 2.4 Ghz
Antenna: 2 x 5dBi Antenna
Plug type: UK standard plug
Port: 1 Ethernet Port
Wi-Fi Transmission Speed: Up to 300Mbps
Features:
▶Booster Wi-Fi Coverage: Extend the existing WiFi coverage to hard-to-reach areas,enhance your WiFi signal;
▶Built-in dual Reaitek Chipset: Provides you with the more stable WiFi signal and the faster speed;
▶ Connect Wired Devices: Ethernet port can connect any wired device such as a smart TV, multimedia player, game console or PC to your WiFi network, work as a media bridge;
▶ Low Power Consumption: Uses environmentally friendly design . It is stable with low radiation and low power.
▶3 in 1 Functions:WiFi Range Extender (Repeater), Wireless Access Point, Wireless Router
♥Tips:
▶Please note that you can only set up repeater in repeater mode on smart phone, please set it up on laptop if you want to use AP mode and router mode.
▶Please note that the Wi-Fi extender only extends the Wi-Fi coverage, could not BOOST the speed of your original router or hold the same speed of the original router.
▶The speed of the repeater depends on your ISP.
Easy installation
1.Connect WiFi signal like “comfast-xxx” in WLAN setting
2.Open the browser and type the IP address:192.168.10.1
3.Enter the default password “admin” and click the “login”
4.It will scan the wireless signal, and then please choose the signal you want to repeat
5.Enter the WiFi password of your wireless router
6.The repeater will be setting successfully within 30s.Then you can go to WLAN setting and connect to the new WiFi SSD
Package Include:
1x Wifi Repeater
1x Web Line
1x UK Plug
1x Quick Installation Guide
RequestThrottled: AWS Access Key ID: AKIAIJ3LCSVBRWZPCMOA. You are submitting requests too quickly. Please retry your requests at a slower rate.
Once it is set up and connected can it be unplugged and plugged into another socket without having to go through the whole set up again?
Followed the process as you have shown us in conjunction with the instruction manuel and it works great, took a long time to figure out that even though the device was indicating that there was no connection between it & the router, it was connected all the time. Any problems with setup just use the reset button on the device and start the process again
what user name do you use for the login? There is no direction in their instructions.
So if I just plug it in and put an ethernet in to it the device will have a direct link to the router? How does that work with the password though? Any help would be greatly appreciated thank you!
Hey man, how can i reset my MECO to conect another WIFI? Thx anyways for the video! 😀
dose this use the power line to connect to the router
Didn’t work you sick and this product sucks don’t buy